Determination of price and quantity supplied by monopolistic firm in the short run
This article describes the process by which a monopoly firm, i.e., a firm that is the only firm selling a particular commodity, selects the quantity to produce and the price to set for the commodity.
Here are some key features of a monopoly firm:
- The firm is a price setter rather than a price taker -- it can choose any price it wants.
- However, for a given price set by the firm, and a given quantity that the firm produces, there is no guarantee that the firm will be able to sell all of what it produces. Thus, instead of being told a market price and trying to optimize the quantity, the firm needs to optimize a (price,quantity) pair based on the market demand curve.
The situation is in sharp contrast to that of determination of quantity supplied by firm in perfectly competitive market in the short run.
The situation is similar to determination of quantity supplied by firm in oligopoly in the short run. In the latter, however, the firm also has to be concerned about the behavior of competing firms, and the response these firms may show to price changes by the firm. Oligopolistic competition is typically studied using tools of game theory.
More generally, when a firm has market power, it has some leeway in setting prices but, in return, has to explicitly consider the market demand curve it faces. When a firm has monopoly, the leeway in setting prices as well as the importance of the market demand curve are maximal.
Contents
- 1 Similar determinations
- 2 Law of one price assumption and price discrimination
- 3 Cost and revenue definitions
- 4 Calculation problem for the firm
- 4.1 Information available to the firm
- 4.2 Goal of the firm
- 4.3 Note on conventions for profit: accounting and not accounting for fixed costs
- 4.4 Choice of price given quantity
- 4.5 Definition of marginal revenue
- 4.6 Relationship between marginal revenue and price-elasticity of demand
- 4.7 There is no short run supply curve
- 5 Formal mathematical analysis under differentiability assumptions
Similar determinations
Contrast with firm in perfectly competitive market
Further information: Determination of quantity supplied by firm in perfectly competitive market in the short run
There are three key differences. The first two are related and the third follows from them:
Parameter | Firm in perfectly competitive market | Monopolistic firm |
---|---|---|
control over market price | no control. The firm must accept the market price. | significant control. The firm sets both its price and quantity of production. |
guarantee of selling everything it produces | guaranteed, as long as it prices at the market price. | no guarantee. The firm needs to choose its price appropriately based on its estimate of the nature of demand and the quantity it produces. |
nature of marginal revenue curve (marginal revenue plotted on the vertical axis as a function of quantity produced on the horizontal axis) | flat horizontal curve with price coordinate equal to the market price | it's complicated, but generally, a downward sloping curve. It can be determined algebraically from the demand curve of the firm -- it has a marginal-to-average relationship with that curve. |
Another way of putting these is that monopolistic firms have more power (in the sense of setting prices) but also more responsibility (in the sense of having to figure what price to set).
Most of the analysis here can be transferred to the perfectly competitive case, with the following change: the marginal revenue curve is replaced by a horizontal curve at value equal to the market price.
Law of one price assumption and price discrimination
In the discussion here, we assume the law of one price, i.e., that the firm must offer a single price to all those buying from it. In other words, we assume that it is impossible for the firm to practice price discrimination, i.e., charge different prices to different buyers.
If the firm can practice price discrimination, the analysis changes considerably. The key significance is that with price discrimination, the firm can charge higher prices for buyers with higher reservation prices and thus avoid to some extent the trade-off between expanding its market and lowering its price.
Cost and revenue definitions
We assume that the firm has two costs:
- Fixed costs are fixed in advance and cannot be altered in the short run. These may include investments in land or other fixed assets that cannot be acquired or got rid of quickly.
- Variable costs are costs that vary with the quantity produced.
We define:
Cost or revenue notion | Acronym | Definition | How does it vary with quantity? |
---|---|---|---|
Fixed cost | FC | Cost of expenditure on fixed factors of production that cannot be varied in the short run | Independent of quantity |
Variable cost | VC | Cost of expenditure on factors of production that can be varied in the short run | Increases with quantity |
Total cost | TC | Fixed cost + Variable cost | Increases with quantity |
Average cost | ATC, AC | (Total cost)/Quantity | Generally, first decreases and then increases with quantity |
Average fixed cost | AFC | (Fixed cost)/Quantity | Decreases with quantity (by definition, because denominator is increasing and numerator is constant). |
Average variable cost | AVC | (Variable cost)/Quantity | Generally, increases with quantity when quantity is large enough. For small quantities, it may decrease with quantity. |
Marginal cost | MC | Derivative of total cost with respect to quantity; since fixed cost is independent of quantity, this is the same as the derivative of variable cost with respect to quantity | Generally, increases with quantity when quantity is large enough. For small quantities, it may decrease with quantity. |
Revenue | R | Revenue earned by producing a given quantity of the commodity. It equals the product of quantity produced and the (unit) market price. Note that because of the small size of the firm relative to the market, it must sell everything it produces at the market price | Increases with quantity (by definition). |
Price | P | Price chosen by the firm | See discussion below |
Marginal revenue | MR | Depends on quantity | |
Profit (not accounting for fixed costs) | Equals R - VC, same as Q(P - AVC) where Q is the quantity produced, P is the unit price chosen by the firm, and AVC is the average variable cost at the given value of Q. | ||
Profit (accounting for fixed costs) | Equals R - TC, same as Q(P - ATC), where Q is the quantity produced, P is the unit price, and AC is the average (total of fixed and variable) cost. In the short run, the firm may choose to produce even if the profit, after accounting for fixed costs, is negative. |
Calculation problem for the firm
Information available to the firm
As before, we assume that the firm serves an entire market and has no competing firms. The firm has two pieces of information:
Piece of information | Nature | Equivalent pieces of information | How it's decided |
---|---|---|---|
the marginal cost curve of the firm | This is a curve describing the marginal cost as a function of quantity produced. Traditionally, the quantity is plotted along the horizontal axis and the cost function along the vertical axis. It is not a single number but rather a functional relationship. | Knowledge of the marginal cost curve is mathematically equivalent to knowledge of the average variable cost curve, the variable cost curve, and (subject to knowledge of the fixed cost),the average fixed cost curve, the average total cost curve, and the total cost curve. This means that knowledge of any one of these curves can be used to deduce the others. | Determined by the firm's production technology and factors of production. The curve itself is not subject to change. |
the market demand curve facing the firm | This is the market demand curve that plots the quantity demanded by the market the firm serves as a function of the price. | See determinants of demand for details. |
Goal of the firm
The firm has to choose two things:
- The quantity that it produces. Call this .
- The price at which it sells whatever it produces. Call this .
The goal of the firm is to maximize its profit. Assuming that the firm is able to sell everything it makes, the profit (not accounting for fixed costs) is given by where is the quantity produced, is the price chosen by the firm, and is the average variable cost (dependent on .
Note on conventions for profit: accounting and not accounting for fixed costs
If denotes the quantity produced, denotes the market price (which is also the same as the marginal and average revenue) then the total revenue is , and the total variable cost is where is the average variable cost for the given choice of . The net profit (not accounting for fixed costs) is , which becomes .
In particular, the net profit (not accounting for fixed costs) is zero at .
The net profit accounting for fixed costs is , which becomes , where is the average total cost, including both average fixed costs and average variable costs.
This is smaller than the profit calculated by not accounting for fixed costs. Also, for the short-run choices, this profit value may well be negative, because the firm treats its fixed costs as sunk costs.
Note that as far as the maximization problem is concerned, both choices of the profit function are equivalent, because they differ by a value that is constant (in the short run). However, there is an advantage to choosing the convention where we compute profits not accounting for fixed costs. The advantage is that it computes the profits relative to the situation of staying idle, i.e., producing nothing, and hence, can be more useful in quickly figuring out whether a certain quantity of production is more profitable than producing nothing.
Choice of price given quantity
The first step in the firm's analysis is to reduce the number of choices from two variables (quantity and price) to one (quantity only). This is easy to do. For a given choice of quantity , the firm wants to choose a price so that is as large as possible, subject to the condition that the firm sells everything it produces. Assuming the law of demand (i.e., a downward sloping demand curve) it is easy to see that the largest possible such price is a price such that the (price,quantity) point lies on the market demand curve. In other words, once the firm has chosen the quantity, the price is automatically determined as being the corresponding price point for the market demand curve. Conversely, if the firm chooses a price, the corresponding quantity is the quantity demanded at that price as per the market demand curve.
Thus, we have reduced the firm's choices from two variables to one (by linking the two variables via the market demand curve). What's left is to choose the quantity produced so as to maximize the firm's profits.
Definition of marginal revenue
Now that we have determined the firm's price as a function of the quantity produced, the firm's total revenue () also becomes a function of the quantity produced. Thus, we can take the derivative of total revenue with respect to quantity produced. This derivative is called marginal revenue and is abbreviated MR.
Note that marginal revenue depends, not on the firm's production technologies, but rather, completely on the firm's market demand curve. Moreover, in analogy terms:
Marginal revenue curve : Market demand curve :: Marginal cost curve : Average variable cost curve
Relationship between marginal revenue and price-elasticity of demand
Further information: price-elasticity of demand
The relationship is below:
Condition on price-elasticity of demand | Conclusion for marginal revenue (note that this is the derivative with respect to quantity, not price. The sign conclusion is opposite if we are trying to figure out the rate of change of revenue with respect to price) | Verbal explanation |
---|---|---|
zero | undefined/infinite | vertical demand curve, meaning that a slight increase in quantity leads to an infinitely quick decrease in price. |
between 0 and -1 (in magnitude, between 0 and 1) | negative | the quantity demanded is highly price-insensitive. Thus, the price is highly sensitive to the quantity demanded (by the inverse function theorem, the sensitivies are reciprocal). A small increase in quantity demanded leads to a larger compensating decrease in the price that can be charged to sell out the quantity, causing the total revenue to decrease. |
equal to -1 | zero (total revenue remains constant). | Here price and quantity are inversely proportional to each other. |
less than -1 (in magnitude, greater than 1) | positive | the quantity demanded is highly price-sensitive. This, the price is insensitive to the quantity demanded. A small increase in quantity demanded leads to a smaller compensating decrease in the price that can be charged to sell out the quantity, causing the total revenue to increase. |
infinite | positive, equal to the price | horizontal demand curve, which means that there is a fixed price and the marginal revenue equals that price. |
There is no short run supply curve
For the corresponding determination of quantity supplied by firm in perfectly competitive market in the short run, it is possible to construct a short run supply curve by finding the profit-maximizing quantity produced by the firm for each price, and expressing this functional relationship through the curve. Here, the price is coming from the market.
A monopolistic firm does not receive a price from the market. Rather, the firm receives a market demand curve and chooses both a price and quantity of production. Thus, there is no notion of a short run supply curve for a monopolistic firm, because it is not receiving a price.
It is still relevant, for a monopolistic firm, to consider the question of how shifts (expansions or contractions) in the demand curve affect the price and quantity produced. However, the analysis must revert directly to the calculation problem for the monopolistic firm and cannot use the short run supply curve as a visual aid.
Formal mathematical analysis under differentiability assumptions
If you find the formal analysis here intimidating, please read the next two sections and then return to the mathematical analysis if you wish.
Determining the profit-maximizing quantity of production
We make the following assumptions:
- The firm can choose to produce any quantity between and a maximum quantity .
- The marginal cost is defined at all quantities of production in . Formally, it is the derivative of with respect to , though at the endpoints and , we take one-sided derivatives.
- For simplicity, we also assume that the curve is continuous and is not highly oscillatory, i.e., we can break up the interval into finitely many pieces and the curve is either increasing or decreasing on each piece.
Our goal is to prove the following:
The absolute (i.e., global) maximum for profit must occur either at one of these three points: zero quantity of production, the maximum quantity of production, or some local maximum at an intermediate quantity of production. In the last case, that must be a point where and, more specifically, the value is changing sign from positive to negative.
We establish this formally in a few steps.
Step no. | Assertion | Explanation |
---|---|---|
1 | The profit function (not accounting for fixed costs) is where is the product of the market price and the quantity produced . | Profit (not accounting for fixed costs) is total revenue minus variable cost. Total revenue is the product . |
2 | The derivative of the profit function with respect to is where is the marginal revenue (defined as the derivative of total revenue with respect to quantity, using price as a function of quantity via the market demand curve) and is the marginal cost (dependent on ). | [SHOW MORE] |
3 | For those quantities of production where , the profit function is increasing with respect to . For those quantities of production where , then the profit function is decreasing with respect to . | See positive derivative implies increasing, negative derivative implies increasing. |
4 | The local maxima for the profit function must occur at points where . Further, under reasonable assumptions of the function not being heavily oscillatory, we must have for slightly less than the point of local maximum and for slightly more than the point of local maximum. In other words, the curve is overtaking the curve. | Follows from (3). We can also interpret this in terms of the first derivative test applied to the profit function as a function of . |
5 | The absolute (i.e., global) maximum for profit must occur either at one of these three points: zero quantity of production, the maximum quantity of production, or some local maximum at an intermediate quantity of production. In the last case, that must be a point where and the curve is overtaking the curve. | Follows directly from Step (4). |